Description

This is the SH 07 Glow Engine. It is an R/C model aircraft engine with a .07c.i. displacement designed for 1/2A size radio controll model aircraft.

This 07 INCLUDES the tuned pipe and header.

Features:

-Dual Needle R/C Throttle Carburetor

-Dual Ball Bearing Supported Crankshaft

-Removable Prop Adapter and Spinner Nut

-ABC (Aluminum Piston, Brass Sleeve, Chrome Plated) construction

-Uses a #3 SH Glow Plug

-Side Exhaust as commonly used in most aircraft applications

Specifications:

Displacement: 1.14cc/.07ci

Bore: 11.5mm

Stroke: 11mm

RPM Range: 6000 ~ 17000 rpm

Weight: 100.2g/3.5oz

Recommended Accessories

Glow Fuel: 10-30% Nitro, two stroke glow fuel. We generally use PowerMaster Sport Model Airplane Fuel or similar.

Glow Plug: The engine includes one SH #3 Glow Plug, this is also the recommended replacement when needed.

Propeller: We use a 7x4, however the engine can use a 6x4, 6x5. 7x3, 7x4, and 8x3

Glow Ignitor: You will need a connector and 1.5v power source to light the glow plug for starting. The glow plug is a standard size so just about any glow starter will work fine.

Pump: You have to get the fuel from the can into the fuel tank in the plane

Fuel Line: This is glow fuel, you'll need a compatible fuel line such as silicone

Fuel Tank: We recommend a 2oz tank.

Electric Starter: Life is much easier with an electric starter. You can hand prop this engine, but it is vastly easier with a starter.

Exhaust Diverter: MGF 130-1 fits

Installation: If your airplane doesn't already have one build-in, you'll need a motor mount, and you'll need a small wire or other device to support/mount the tuned pipe. It needs to be supported at the end or it will fall off in flight.

Basic Tools: We recommend the SH All-n-1 Screwdriver/Hex Wrench , And you'll need needle nose pliers to install the header mounting springs.

We carry parts for this engine. If you do not see the part you are looking for, please email us.